EDS-P506A-4PoE Series

 

Features and Benefits

Advanced PoE management function (PoE port setting, PD failure check, and PoE scheduling)
24/48 VDC wide range redundant power inputs
Command Line Interface (CLI) for quickly configuring major managed functions
IEEE 1588 PTP V2 (Precision Time Protocol) for precise time synchronization of networks
Support EtherNet/IP, PROFINET* and Modbus/TCP protocols for device management and monitoring
Turbo Ring and Turbo Chain (recovery time < 20 ms), RSTP/STP, and MSTP for network redundancy
IGMP snooping and GMRP for filtering multicast traffic
Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning
QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism
Port Trunking for optimum bandwidth utilization
TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
*Available in Q4, 2013

Introduction

The EDS-P506A-4PoE series managed redundant Ethernet switches come standard with 4 10/100BaseT(X) 802.3at (PoE+) and 802.3af (PoE) compliant Ethernet ports and 2 10/100BaseT(X) or 2 10/100BaseFX Ethernet ports. The EDS-P506A-4PoE switches provide up to 30 watts of power per PoE port, and allow power to be supplied to connected high-power devices (such as high-end PTZ camera and WiMAX devices) when AC power is not readily available or is costprohibitive to provide locally. The EDS-P506A-4PoE series switches are highly versatile, and their fiber port can transmit data up to 80 km from the device to the control center with high EMI immunity. The Ethernet switches support advanced management and security features. The EDS-P506A-4PoE series series is designed especially for security automation applications such as IP surveillance, and gate of entry systems, which can benefit from a scalable backbone construction and Power-over-Ethernet support.

Technology
Standards

IEEE 802.3af/at for Power-over-Ethernet

IEEE 802.3 for 10BaseT

IEEE 802.3u for 100BaseT(X) and 100BaseFX

IEEE 802.3x for Flow Control

IEEE 802.1D-2004 for Spanning Tree Protocol

IEEE 802.1w for Rapid STP

IEEE 802.1s for Multiple Spanning Tree Protocol

IEEE 802.1Q for VLAN Tagging

IEEE 802.1p for Class of Service

IEEE 802.1X for Authentication

IEEE 802.3ad for Port Trunk with LACP

Protocols

IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog, EtherNet/IP, PROFINET*, Modbus/TCP, SNMP Inform, LLDP, IEEE 1588 PTP V2, IPv6, NTP Server/Client

*Available in Q4, 2013

MIB MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control IEEE 802.3x flow control, back pressure flow control
Switch Properties
Priority Queues 4
Max. Number of Available VLANs 64
VLAN ID Range VID 1 to 4094
IGMP Groups 256
MAC Table Size 8 K
Packet Buffer Size 1 Mbit
Interface
Fiber Ports 100BaseFX ports (SC/ST connector)
RJ45 Ports 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection
PoE Pinout V+, V+, V-, V- for pin 1, 2, 3, 6 (Endspan, MDI Alternative A)
Console Port RS-232 (RJ45 connector)
DIP Switches Turbo Ring, Master, Coupler, Reserve
LED Indicators PWR1, PWR2, FAULT, 10/100M, MSTR/HEAD, CPLR/TAIL, PoE
Alarm Contact 2 relay outputs with current carrying capacity of 1 A @ 24 VDC
Digital Inputs

2 inputs with the same ground, but electrically isolated from the electronics.

• +13 to +30V for state “1”

• -30 to +3V for state “0”

• Max. input current: 8 mA

Optical Fiber
EDS-P506
Power Requirements
Input Voltage 24/48 (20 to 60 V) VDC, redundant dual inputs
Input Current Max. 7.8 A @ 24 VDC (supports up to 4 ports at 30 watts per PoE port)
Connection 2 removable 6-contact terminal blocks
Reverse Polarity Protection Present
Physical Characteristics
Housing Metal, IP30 protection
Dimensions 80 x 135 x 131.5 mm (3.15 x 5.31 x 5.18 in)
Weight 1270 g
Installation DIN-Rail mounting, wall mounting (with optional kit)
Environmental Limits
Operating Temperature

Standard Models: 0 to 60°C (32 to 140°F)

Wide Operating Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Standards and Certifications
Safety UL 60950-1, UL 508
EMI FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS

EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3,

EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3,

EN 61000-4-6 (CS) Level 3, EN 61000-4-8

Rail Traffic EN 50121-4
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
Note Please check Moxa’s website for the most up-to-date certification status.
MTBF (mean time between failures)
Time 433,000 hrs
Database Telcordia (Bellcore), GB
Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty

Produkter i denna serie

Info Portar
Ethernetportar Fiberportar
Namn Temperatur-
område
Managerbar Totalt
portantal
Gigabit
Ethernet
Ethernet
Portar
PoE
Portar
M SC M ST M SC
EDS-P506A-4PoE0 till 60Ja6 24   
EDS-P506A-4PoE-MM-SC0 till 60Ja6  42  
EDS-P506A-4PoE-MM-SC-T-25 till 60Ja6  42  
EDS-P506A-4PoE-MM-ST0 till 60Ja6  4 2 
EDS-P506A-4PoE-MM-ST-T-25 till 60Ja6  4 2 
EDS-P506A-4PoE-SS-SC0 till 60Ja6  4  2
EDS-P506A-4PoE-SS-SC-T-25 till 60Ja6  4  2
EDS-P506A-4PoE-T-25 till 60Ja6 24