NPort 5210A/5230A/5250A Series

Features and Benefits

World’s lowest power consumption
Speedy 3-step web-based configuration
Surge protection for serial, Ethernet, and power lines
COM port grouping and UDP multicast applications
Screw connectors for secure installation
Dual DC power inputs with power jack and terminal block
Versatile TCP and UDP operation modes
Supports Moxa’s MXview industrial network management software via the MXview Plug-in

Overview

The NPort 5200A device servers are designed to make serial devices network-ready in an instant and give your PC software direct access to serial devices from anywhere on the network. The NPort 5200A device servers are ultra lean, ruggedized, and user friendly, making simple and reliable serial to Ethernet solutions possible.


A Greener Serial-to-Ethernet Solution

The Moxa MiiNe is a small but powerful ARM-based serial-to-Ethernet SoC with RAM and Flash embedded. With the MiiNe inside, the NPort 5200A series becomes the lowest power consumption device server in the world. The NPort 5200A series saves at least 50% on power consumption compared to existing solutions on the market, helping engineers meet the tough environmental compliance challenges found in today’s industrial environments.

Surge-protected Serial, Ethernet, and Power Lines

Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa’s leading-edge surge immunity solution, which is applied to the NPort 5200A’s serial, power, and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This state-of-the-art surge protection provides a robust serialto-Ethernet solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.

3-step Web-based Configuration

The NPort 5200A’s 3-step web-based configuration tool is straightforward and user-friendly. The NPort 5200A’s web console guides users through 3 simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this speedy 3-step web-based configuration, a user only needs to spend an average of 30 seconds to complete the NPort settings and enable the application, saving a great amount of time and effort.

COM Port Grouping

The NPort 5200A’s COM Grouping function allows you to create a COM Group and redirect data from it to several physical COM ports on NPort device servers. With COM Grouping, you will be able to control multiple physical serial ports simultaneously by operating only one COM port.

 

Ethernet Interface
Number of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Connector 8-pin RJ45
Magnetic Isolation Protection 1.5 KV built-in
Ethernet Line Protection EN61000-4-5 (Surge) Level 2
Serial Interface
Number of Ports 2
Serial Standards NPort 5210A: RS-232

NPort 5230A: RS-422/485

NPort 5250A: RS-232/422/485

Connector NPort 5210A/5250A: DB9 male

NPort 5230A: Terminal Block (5 pins per port)

Serial Line Protection 15 KV ESD protection for all signals, EN61000-4-5 (Surge) Level 1
RS-485 Data Direction Control ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485 1 KΩ, 150 KΩ
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF
Baudrate 50 bps to 921.6 Kbps
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
Software
Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2
Configuration Options Web Console (with new Quick Setup), Serial Console (NPort 5210A/5250A only), Telnet Console, Windows Utility
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7,8 x86/x64, 2012 x64
Fixed TTY Drivers SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac 10.3
Linux Real TTY Drivers Linux kernel 2.4.x, 2.6.x, 3.x
Physical Characteristics
Housing Metal
Weight 340 g
Dimensions Without ears: 77 x 111 x 26 mm (3.03 x 4.37 x 1.02 in)

With ears: 100 x 111 x 26 mm (3.94 x 4.37 x 1.02 in)

Environmental Limits
Operating Temperature Standard Models: 0 to 60°C (32 to 140°F)

Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Power Requirements
Input Voltage 12 to 48 VDC
Power Consumption 119 mA @ 12V, 65 mA @ 24V
Standards and Certifications
Safety UL 60950-1, EN 60950-1
EMC CE, FCC
EMI EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS EN 55024
Power Line Protection EN61000-4-4 (EFT) Level 2,

EN61000-4-5 (Surge) Level 3

Reliability
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (mean time between failures) 847,750 hrs
Warranty
Warranty Period 5 years
Details See http://www.moxa.com/support/warranty.htm

Produkter i denna serie

Namn Antal
portar
Inspänning Temperatur-
område
Seriel-
kontakt
Ethernet-
kontakt
Övrig information Klicka för info
NPort 5210A212 till 48 VDC0° -60 °DB9-MRJ45 
NPort 5210A-T212 till 48 VDC-40° -75 °DB9-MRJ45Utökat temp.område
NPort 5230A212 till 48 VDC0° -60 °TBRJ45 
NPort 5230A-T212 till 48 VDC-40° -75 °TBRJ45Utökat temp.område
NPort 5250A212 till 48 VDC0° -60 °DB9-MRJ45 
NPort 5250A-T212 till 48 VDC-40° -75 °DB9-MRJ45Utökat temp.område