NPort 5610-8-DTL/5650-8-DTL Series

 

Features and Benefits

8 serial ports supporting RS-232/422/485
Compact desktop design
10/100M auto-sensing Ethernet
Built-in 15 KV ESD protection for all serial signals
Choice of configuration methods: Web console, Telnet console, and Windows utility
Versatile socket operation modes, including TCP Server, TCP Client, UDP, and Real COM
SNMP MIB-II for network management
Supports Moxa’s MXview industrial network management software via the MXview Plug-in

Overview

NPort® 5600-8-DTL device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. You can both centralize management of your serial devices and distribute management hosts over the network. Since the NPort® 5600-8-DTL device servers have a smaller form factor compared to our 19-inch models, they are a great choice for applications that need additional serial ports, but for which mounting rails are not available.

Convenient Design for RS-485 Applications

 

The NPort® 5650-8-DTL device servers support selectable 1 KΩ and 150 KΩ pull high/low resistors and a 120 Ω terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that
the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort® 5600-8-DTL device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port.

 

LED Indicators to Ease Your Maintenance Tasks

The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The NPort® 5600’s LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.

Utseende

NPort_5600-8-DTL_appearance

Dimensioner

NPort_5600-8-DTL_dimension_A

NPort_5600-8-DTL_dimension_B

PIN assignment

NPort_5600-8-DTL_Pin_Assignment
Ethernet Interface
Number of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Connector 8-pin RJ45
Magnetic Isolation Protection 1.5 KV built-in
Serial Interface
Number of Ports 8
Serial Standards NPort 5610-8-DTL: RS-232NPort 5650-8-DTL/5650I-8-DTL: RS-232/422/485
Connector DB9 male
Serial Line Protection 15 KV ESD protection for all signals2 KV isolation protection (NPort 5650I-8-DTL only)
RS-485 Data Direction Control ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485 1 KΩ, 150 KΩ
Terminator for RS-485 120 Ω
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate 50 bps to 921.6 Kbps
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
Software
Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, Rtelnet, ARP, RFC2217
Configuration Options Web Console, Telnet Console, Serial Console, Windows Utility
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8 x86/x64, 2012 x64, XP Embedded
Fixed TTY Drivers SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Linux Real TTY Drivers Linux kernel 2.4.x, 2.6.x, 3.x
Physical Characteristics
Housing Metal, IP30 protection
Weight NPort 5610-8-DTL: 1760 gNPort 5650-8-DTL: 1770 gNPort 5650I-8-DTL: 1850 g
Dimensions Without ears: 197 x 44 x 125 mm (7.76 x 1.73 x 4.92 in)With ears: 229 x 46 x 125 mm (9.01 x 1.81 x 4.92 in)With DIN-Rail kit on bottom panel: 197 x 53 x 125 mm (7.76 x 2.09 x 4.92 in)
Environmental Limits
Operating Temperature Standard Models: 0 to 60°C (32 to 140°F)Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Power Requirements
Input Voltage 12 to 48 VDC
Power Consumption NPort 5610-8-DTL: 340 mA @ 12 V, 180 mA @ 24 V, 110 mA @ 48 VNPort 5650-8-DTL: 470 mA @ 12 V, 250 mA @ 24 V, 140 mA @ 48 VNPort 5650I-8-DTL: 740 mA @ 12 V, 370 mA @ 24 V, 220 mA @ 48 V
Standards and Certifications
Safety UL 60950-1, EN 60950-1
EMC CE, FCC
EMI EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS EN 55024
Reliability
Alert Tools Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger Built-in WDT (watchdog timer)
Warranty
Warranty Period 5 years
Details See http://www.moxa.com/support/warranty.htm

 

Produkter i denna serie

Namn Antal
portar
Inspänning Temperatur-
område
Seriel-
kontakt
Ethernet-
kontakt
Övrig information Klicka för info
NPort 5610-8-DTL812 till 48 VDC0° -60 °DB9-MRJ45 
NPort 5650-8-DTL812 till 48 VDC0° -60 °DB9-MRJ45 
NPort 5650I-8-DTL812 till 48 VDC0° -60 °DB9-MRJ452 KV isolation
NPort 5610-8-DTL-T812 till 48 VDC-40° -75 °DB9-MRJ45 
NPort 5650-8-DTL-T812 till 48 VDC-40° -75 °DB9-MRJ45 
NPort 5650I-8-DTL-T812 till 48 VDC-40° -75 °DB9-MRJ452 KV isolation