Features and Benefits
Advanced PoE management function (PoE port setting, PD failure check, and PoE scheduling)
24/48 VDC wide range redundant power inputs
Command Line Interface (CLI) for quickly configuring major managed functions
IEEE 1588 PTP V2 (Precision Time Protocol) for precise time synchronization of networks
Support EtherNet/IP, PROFINET* and Modbus/TCP protocols for device management and monitoring
Turbo Ring and Turbo Chain (recovery time < 20 ms), RSTP/STP, and MSTP for network redundancy
IGMP snooping and GMRP for filtering multicast traffic
Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning
QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism
Port Trunking for optimum bandwidth utilization
TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
*Available in Q4, 2013
Introduction
The EDS-P506A-4PoE series managed redundant Ethernet switches come standard with 4 10/100BaseT(X) 802.3at (PoE+) and 802.3af (PoE) compliant Ethernet ports and 2 10/100BaseT(X) or 2 10/100BaseFX Ethernet ports. The EDS-P506A-4PoE switches provide up to 30 watts of power per PoE port, and allow power to be supplied to connected high-power devices (such as high-end PTZ camera and WiMAX devices) when AC power is not readily available or is costprohibitive to provide locally. The EDS-P506A-4PoE series switches are highly versatile, and their fiber port can transmit data up to 80 km from the device to the control center with high EMI immunity. The Ethernet switches support advanced management and security features. The EDS-P506A-4PoE series series is designed especially for security automation applications such as IP surveillance, and gate of entry systems, which can benefit from a scalable backbone construction and Power-over-Ethernet support.
• Technology | |
Standards |
IEEE 802.3af/at for Power-over-Ethernet IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3x for Flow Control IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1Q for VLAN Tagging IEEE 802.1p for Class of Service IEEE 802.1X for Authentication IEEE 802.3ad for Port Trunk with LACP |
Protocols |
IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog, EtherNet/IP, PROFINET*, Modbus/TCP, SNMP Inform, LLDP, IEEE 1588 PTP V2, IPv6, NTP Server/Client *Available in Q4, 2013 |
MIB | MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 |
Flow Control | IEEE 802.3x flow control, back pressure flow control |
• Switch Properties | |
Priority Queues | 4 |
Max. Number of Available VLANs | 64 |
VLAN ID Range | VID 1 to 4094 |
IGMP Groups | 256 |
MAC Table Size | 8 K |
Packet Buffer Size | 1 Mbit |
• Interface | |
Fiber Ports | 100BaseFX ports (SC/ST connector) |
RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
PoE Pinout | V+, V+, V-, V- for pin 1, 2, 3, 6 (Endspan, MDI Alternative A) |
Console Port | RS-232 (RJ45 connector) |
DIP Switches | Turbo Ring, Master, Coupler, Reserve |
LED Indicators | PWR1, PWR2, FAULT, 10/100M, MSTR/HEAD, CPLR/TAIL, PoE |
Alarm Contact | 2 relay outputs with current carrying capacity of 1 A @ 24 VDC |
Digital Inputs |
2 inputs with the same ground, but electrically isolated from the electronics. • +13 to +30V for state “1” • -30 to +3V for state “0” • Max. input current: 8 mA |
• Optical Fiber | |
![]() |
|
• Power Requirements | |
Input Voltage | 24/48 (20 to 60 V) VDC, redundant dual inputs |
Input Current | Max. 7.8 A @ 24 VDC (supports up to 4 ports at 30 watts per PoE port) |
Connection | 2 removable 6-contact terminal blocks |
Reverse Polarity Protection | Present |
• Physical Characteristics | |
Housing | Metal, IP30 protection |
Dimensions | 80 x 135 x 131.5 mm (3.15 x 5.31 x 5.18 in) |
Weight | 1270 g |
Installation | DIN-Rail mounting, wall mounting (with optional kit) |
• Environmental Limits | |
Operating Temperature |
Standard Models: 0 to 60°C (32 to 140°F) Wide Operating Temp. Models: -40 to 75°C (-40 to 167°F) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
• Standards and Certifications | |
Safety | UL 60950-1, UL 508 |
EMI | FCC Part 15 Subpart B Class A, EN 55022 Class A |
EMS |
EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8 |
Rail Traffic | EN 50121-4 |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
• MTBF (mean time between failures) | |
Time | 433,000 hrs |
Database | Telcordia (Bellcore), GB |
• Warranty | |
Warranty Period | 5 years |
Details | See www.moxa.com/warranty |
Produkter i denna serie
Info | Portar | ||||||||
Ethernetportar | Fiberportar | ||||||||
Namn | Temperatur- område |
Managerbar | Totalt portantal |
Gigabit Ethernet |
Ethernet Portar |
PoE Portar |
M SC | M ST | M SC |
---|