 |
End of Life product |
||
| Please note that the CI-132 Series has been phased out, and has been replaced by the CP-132EL Series. If you have further questions, please contact us for more details. | |||
CP-132EL |
2-port RS-422/485 PCI Express boards with optional 2 kV isolation |
Datasheet |
|
Features and Benefits
- Economical RS-422/485 ISA board with 2 DB9 male connectors on the board for easy wiring
- RS-485 data direction control with ADDC® or by RTS
- 921.6 Kbps maximum baudrate for super fast data transmission
- 16-byte FIFO and on-chip hardware flow control
- Surge protection and optical isolation available
- Built-in termination resistors
Overview
The CI-132 series ISA boards come with 2 independent RS-422/485 serial ports for connecting data acquisition equipment and other serial devices to a PC. Connect your devices over longer distances—up to 1.2 km (4000 ft)—and ensure greater reliability in industrial environments with on-board surge protection and optical isolation (available with some models). Enjoy greater versatility by using point-to-point full duplex connections, or set up a half duplex RS-485 multi-drop network.
• Hardware
Comm. Controller
16C550C or compatible x 2
Bus
16-bit ISA
Connectors
DB9 male x 2
• Serial Interface
Number of Ports
2
Serial Standards
RS-422/485
Max. No. of Boards per PC
4
• Serial Line Protection
ESD Protection
25 KV on the board (CI-132IS only)
Optical Isolation
2 KV (CI-132I/IS only)
• Performance
Baudrate
50 bps to 921.6 Kbps
Built-in Termination Resistor
120 ohm (enabled by jumper for RS-485-2w)
• Serial Communication Parameters
Data Bits
5, 6, 7, 8
Stop Bits
1, 1.5, 2
Parity
None, Even, Odd, Space, Mark
I/O Address
0x0000-0xFFFF (default = 0x180)
IRQ
2 (9), 3, 4, 5, 7, 10 (default), 11, 12, 15
• Serial Signals
RS-422
TxD+(B), TxD-(A), RxD+(B), RxD-(A), RTS+(B), RTS-(A), CTS+(B), CTS-(A), GND
RS-485-2w
Data+(B), Data-(A), GND
RS-485 Data Control
ADDC® (automatic data direction control), or by RTS
• Driver Support
Operating Systems
Windows 9X/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64, Windows XP Embedded, DOS, Linux 2.4, Linux 2.6 x86/x64, QNX 4/6, FreeBSD 4/5, SCO OpenServer 5/6, UnixWare 7
Note
Please refer to Moxa’s website for the latest driver support information.
• Physical Characteristics
Dimensions
CI-132: 75 x 157 mm (2.95 x 6.18 in)
CI-132I/IS: 105 x 157 mm (4.13 x 6.18 in)
• Environmental Limits
Operating Temperature
0 to 55°C (32 to 131°F)
Storage Temperature
-20 to 85°C (-4 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
• Standards and Certifications
EMC
CE, FCC
EMI
EN 55022, FCC Part 15 Subpart B Class B
EMS
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4
Green Product
RoHS, CRoHS, WEEE
• MTBF (mean time between failures)
Time
441,015 hrs
Database
Telcordia (Bellcore), GB
• Power Requirements
Power Consumption
CI-132: 240 mA max. @ +5 V
CI-132I/IS: 620 mA max. @ +5 V
• Warranty
Warranty Period
5 years
Details
See http://www.moxa.com/support/warranty.htm