EDR-810 serien

8+2G multiport industrial secure router with switch/firewall/NAT/VPN

Logotyp DNV -GL godkännande  Bild certifierad produkt EN 50121-4Nema TS2 certifierad produkt Symbol för godkännande att använda i EXplosiv miljöLogotype CE certifikat

Features and Benefits

8+2G all-in-one firewall/NAT/VPN/router/switch
Secure remote access tunnel with VPN
Stateful firewall protects critical assets
Inspect industrial protocols with PacketGuard technology
Easy network setup with Network Address Translation (NAT)
RSTP/Turbo Ring redundant protocol enhances network redundancy
-40 to 75°C operating temperature range (-T model)
Security features based on IEC 62443/NERC CIP
Check firewall settings with intelligent SettingCheck feature

 

Introduction

The EDR-810 is a highly integrated industrial multiport secure router with Firewall/NAT/VPN and managed Layer 2 switch functions. It is designed for Ethernet security applications in sensitive remote control or monitoring networks, and provides an electronic security perimeter for the protection of critical cyber assets such as pumping/treatment systems in water stations, DCS systems in oil and gas applications, and PLC/SCADA systems in factory automation. The EDS-810 series includes the following cyber security features:

• Firewall/NAT: Firewall policies control network traffic between different trust zones, and Network Address Translation (NAT) shields the internal LAN from unauthorized activity from outside hosts.
• VPN: Virtual Private Networking (VPN) is designed to provide users with secure communication tunnels when accessing a private network from the public Internet. Uses IPSec (IP Security) server or client mode for encryption and authentication of all IP packets at the network layer to ensure confidentiality and sender authentication.

The EDR-810’s “WAN Routing Quick Setting” provides an easy way for users to set up WAN and LAN ports to create a routing function automatically. In addition, the EDR-810’s “Quick Automation Profile” gives engineers a simple way to configure the firewall filtering function with general automation protocols, including EtherNet/IP, Modbus TCP, EtherCAT, FOUNDATION Fieldbus, and PROFINET. Users can easily create a secure Ethernet network from a user-friendly web UI with a single click, and the EDR-810 is capable of performing deep Modbus TCP packet inspection. Wide temperature models that operate reliably in hazardous, -40 to 75°C environments, are also available.

 

EDR-810_dimension
Technology
Standards

IEEE 802.3 for 10BaseT

IEEE 802.3u for 100BaseT(X)

IEEE 802.3ab for 1000BaseT(X)

IEEE 802.3z for 1000BaseX

IEEE 802.1Q for VLAN tagging

IEEE 802.3ad for port trunk

Protocols SNMP v1/v2c/v3, DHCP server/client, TFTP, NTP server/client, HTTP, HTTPS, Telnet, SSH, GVRP, IPSec, L2TP, IGMP v1/v2/v3, QoS/CoS/ToS, Radius, TACACS+, LACP, GMRP**, 802.1X, RSTP/STP, Turbo Ring
Routing Static routing, RIP V1/V2, Multicast routing, DVMRP**, PIM-DM**, VRRP
Redundancy STP/RSTP, Turbo Ring
Flow Control IEEE 802.3x flow control, back pressure flow control
Interface
RJ45 Ports 10/100BaseT(X) auto negotiation speed
Fiber Ports 1000BaseSFP slot
LED Indicators STATE, PWR1, PWR2, FAULT, 10/100/1000M
Alarm Contact One relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs

1 2-contact terminal block• +13 to +30 V for state ”1”

• -30 to +3 V for state ”0”

• Max. input current: 8 mA

Security Function
Firewall

• Stateful inspection

• Filter: IP and MAC address, ports, protocol

Industrial protocol inspection Modbus TCP
Quick Automation Profile EtherCAT, EtherNet/IP, FOUNDATION Fieldbus, LonWorks, Modbus/TCP, PROFINET, IEC 60870-104, DNP, FTP, SSH, Telnet, HTTP, IPSec, L2TP, PPTP, RADIUS
NAT N-to-1, 1-to-1, and port forwarding
VPN IPSec, L2TP, PPTP (VPN model)
Encryption DES, 3DES, AES (VPN model)
Note VPN model will be available in Q3, 2013
Authentication Pre-shared key (PSK), X.509v3 certificates, MD5, SHA
Power Requirements
Input Voltage 12/24/48 VDC (9.6 to 60 VDC), redundant dual inputs
Input Current 0.37 A @ 24 V
Overload Current Protection Present
Connection Removable terminal block
Reverse Polarity Protection Present
Physical Characteristics
Housing Metal
Dimensions 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Weight 830 g
Installation DIN-Rail mounting, wall mounting (with optional kit)
Environmental Limits
Operating Temperature

Standard Models: -10 to 60°C (14 to 140°F)

Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95 % (non-condensing)
Standards and Certifications
Safety UL 508 (pending)
EMI FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS

EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3,

EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3,

EN 61000-4-6 (CS) Level 3

Rail Traffic EN 50121-4
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
Note Please check Moxa’s website for the most up-to-date certification status.
MTBF (mean time between failures)
Time TBD
Database Telcordia (Bellcore), GB
Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty