
Industrial secure routers with firewall/NAT/VPN




Features and Benefits
- Firewall/NAT/VPN/Router all-in-one
Secure remote access tunnel with VPN
Stateful firewall protects critical assets
Inspect industrial protocols with PacketGuard technology
High performance Gigabit copper/fiber combo port
Easy network setup with Network Address Translation (NAT)
Dual WAN redundant interfaces through public networks
Support for VLANs in different interfaces
-40 to 75°C operating temperature range (-T model)
Security features based on IEC 62443/NERC CIP
Introduction
The EDR-G902 is a high-performance, industrial VPN server with a firewall/NAT all-in-one secure router. It is designed for Ethernet-based security applications on critical remote control or monitoring networks, and it provides an Electronic Security Perimeter for the protection of critical cyber assets including pumping stations, DCS, PLC systems on oil rigs, and water treatment systems. The EDR-G902 Series includes the following cybersecurity features:
• Virtual Private Networking (VPN)*: VPNs are designed to provide users with secure communication links when accessing a private network from the public Internet. Uses IPSec (IP Security) for encryption and authentication of all IP packets at the network layer to ensure confidentiality and sender authentication.
• Firewall: Controls network traffic between different trust zones.Network Address Translation (NAT), which shields the internal LAN from unauthorized activity from outside hosts, is included.
rotocols, including EtherCAT, EtherNet/IP, FOUNDATION Fieldbus, Modbus/TCP, and PROFINET. Users can easily create a secure Ethernet Fieldbus network from a user-friendly web UI with a single click operation. In addition, wide temperature models are available that operate reliably in hazardous, -40 to 75°C environments.
The EDR-G902’s Quick Automation Profile function supports most common fieldbus protocols, including EtherCAT, EtherNet/IP, FOUNDATION Fieldbus, Modbus TCP, and PROFINET. Users can easily create a secure Ethernet Fieldbus network from a user-friendly web UI with a single click. In addition, Moxa’s PacketGuard technology (Deep Packet Inspection) helps to filter Modbus TCP commands at OSI layer 7. The wide-temperature range models that are available operate reliably in hazardous, -40 to 75°C environments.
• Technology | |
Standards |
IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseX |
Protocols | SNMPv1/v2c/v3, DHCP Server/Client, TFTP, NTP, HTTP, HTTPS, Telnet, SSH, Syslog, SMTP, LLDP, PPPoE, PPTP, Dynamic DNS, QoS (Quality of Service), VRRP |
Routing | Static routing, RIP V1/V2 |
Flow Control | IEEE 802.3x flow control, back pressure flow control |
• Interface | |
WAN | 1 RJ45/fiber combo port |
LAN | 1 RJ45 port |
RJ45 Ports | 10/100/1000BaseT(X) auto negotiation speed |
Fiber Ports | 100/1000BaseSFP slot |
LED Indicators | PWR1, PWR2, FAULT, 10/100/1000M |
Alarm Contact | One relay output with current carrying capacity of 1 A @ 24 VDC |
Digital Inputs |
1 input• +13 to +30 V for state ”1” • -30 to +3 V for state ”0” • Max. input current: 8 mA |
• Security Function | |
Firewall |
• Stateful inspection • Filter: IP and MAC address, ports, protocol • Bridge mode firewall |
Quick Automation Profile | EtherCAT, EtherNet/IP, FOUNDATION Fieldbus, LonWorks, Modbus/TCP, PROFINET, IEC 60870-104, DNP, FTP, SSH, Telnet, HTTP, IPSec, L2TP, PPTP, RADIUS |
NAT | N-to-1, 1-to-1, and port forwarding |
VPN | IPSec, L2TP, PPTP |
Encryption | DES, 3DES, AES |
Authentication | Pre-shared key (PSK), X.509v3 certificates, MD5, SHA |
Data Throughput | 300 Mbps (large packets) |
VPN Throughput | 60 Mbps (AES-256, SHA-256) |
• Power Requirements | |
Input Voltage | 12/24/48 VDC (9.6 to 60 VDC), redundant dual inputs |
Input Current | 0.53 A @ 24 V |
Overload Current Protection | Present |
Connection | Removable terminal block |
Reverse Polarity Protection | Present |
• Physical Characteristics | |
Housing | Metal, IP 30 protection |
Dimensions | 51 x 152 x 131.1 mm (2.01 x 5.98 x 5.16 in) |
Weight | 1250 g |
Installation | DIN-Rail mounting, wall mounting (with optional kit) |
• Environmental Limits | |
Operating Temperature |
Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95 % (non-condensing) |
• Standards and Certifications | |
Safety | UL 60950-1, UL 508 (pending) |
EMI | FCC Part 15 Subpart B Class A, EN 55022 Class A |
EMS |
EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3 |
Marine | DNV (Pending), GL (Pending) |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
Note | Please check Moxa’s website for the most up-to-date certification status. |
• MTBF (mean time between failures) | |
Time | 530,000 hrs |
Database | Telcordia (Bellcore), GB |
• Warranty | |
Warranty Period | 5 years |
Details | See www.moxa.com/warranty |