EDS‑2010‑ML – Robust 8+2G industriell unmanaged switch för krävande miljöer
EDS‑2010‑ML är en kompakt och driftsäker industriell Ethernet‑switch med åtta 10/100M-portar och två 10/100/1000BaseT(X) eller 100/1000BaseSFP combo‑portar. Den är utvecklad för installationer som kräver stabil kommunikation, hög bandbredd och lång livslängd i tuffa industriella miljöer.
Switcharna lämpar sig väl för applikationer inom energi, transport, automation och processindustri, där nätverket behöver fungera utan avbrott.
Viktiga egenskaper
- 2 Gigabit‑uplinks för flexibel och snabb dataaggregering
- SFP‑stöd för fiberanslutning (SFP-modulerna beställs separat, se ”Tillbehör” nedan)
- QoS för prioritering av tidskritisk trafik
- Larmutgång för strömavbrott och portfel
- IP30‑klassat metallchassi
- Redundant 12/24/48 VDC strömförsörjning
- DIN‑skenemontage
- Temperaturområde –40 till +75 °C (T‑modell)
- Burn‑in‑testad enligt Moxas standardprocess för att säkerställa stabil drift över tid
Datablad (engelska)Introduktion
EDS‑2010‑ML är konstruerad för att leverera stabil och förutsägbar nätverkskommunikation även under hård belastning. Med DIP‑switchar på frontpanelen kan användaren enkelt aktivera eller inaktivera funktioner som:
- Quality of Service (QoS)
- Broadcast storm protection
- Port break‑alarm
Detta gör switchen flexibel och anpassningsbar för olika typer av industriella nätverk.
Serien erbjuder hög EMC‑tålighet, kompakt formfaktor och en konstruktion som följer Moxas etablerade kvalitetsrutiner. Resultatet är en switch som fungerar väl både i nya installationer och vid uppgraderingar av befintliga nätverk
• Ethernet Interface |
|
| 10/100BaseT(X) Ports (RJ45 connector) | 8 Auto negotiation speed Full/Half duplex mode Auto MDI/MDI-X connection |
| Combo Ports (10/100/1000BaseT(X) or 100/1000BaseSFP+) | 2 Auto negotiation speed Auto MDI/MDI-X connection Full/Half duplex mode |
| Standards |
IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseX IEEE 802.3x for flow control IEEE 802.1p for Class of Service |
• DIP Switch Configuration |
|
| Ethernet Interface | Quality of Service (QoS), Broadcast storm protection, Port break alarm |
• Switch Properties |
|
| MAC Table Size | 8 K |
| Packet Buffer Size | 4Mbits |
| Processing Type | Store and Forward |
• Ethernet Interface |
|
| LED Indicators | Power, 10/100M (TP port), 100M (fiber port) |
• Optical Fiber |
|
| 100/1000 BaseSFP+, choose SFP after type of transiver, fibre cable, typical distance, wave-lenght or calculation. Some SFP might need an attenuator to prevent transiver for being damaged by excessive optical power. | |
• Power Parameters |
|
| Input Voltage | 12/24/48 VDC, Redundant dual inputs |
| Input Current | 0.251 A @ 24 V |
| Overload Current Protection | Supported |
| Connection | 1 removable 6-contact terminal block |
| Reverse Polarity Protection | Supported |
• Physical Characteristics |
|
| Housing | Metal, IP30 protection |
| Dimensions | 36 x 135 x 95 mm |
| Weight | 498 |
| Installation | DIN-Rail mounting, Wall mounting (optonal kit) |
• Environmental Limits |
|
| Operating Temperature |
EDS-2010-ML-2GTxSFP: -10 to 60°C (14 to 140°F) EDS-2010-ML-2GTxSFP-T: -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
• Standards and Certifications |
|
| Safety | UL 61010-2-201, EN 62368-1(LVD) |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 MHz: 20 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF |
| Shock | IEC 60068-2-27 |
| Freefall | IEC 60068-2-32 |
| Vibration | IEC 60068-2-6 |
| Railway | EN 50121-4 |
| Note | Please check Moxa’s website for the most up-to-date certification status. |
• MTBF (mean time between failures) |
|
| Time | 2,174,016 hrs |
| Standards | Telcordia (Bellcore), GB |
• Warranty |
|
| Warranty Period | 5 years |
| Details | See www.moxa.com/warranty |
Accessories (sold separately)
 • SFP Modules |
|
| SFP-1G10ALC | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1310 nm, RX 1550 nm, 0 to 60°C operating temperature |
| SFP-1G10ALC-T | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1310 nm, RX 1550 nm, -40 to 85°C operating temperature |
| SFP-1G10BLC | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1550 nm, RX 1310 nm, 0 to 60°C operating temperature |
| SFP-1G10BLC-T | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1550 nm, RX 1310 nm, -40 to 85°C operating temperature |
| SFP-1G20ALC | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1310 nm, RX 1550 nm, 0 to 60°C operating temperature |
| SFP-1G20ALC-T | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1310 nm, RX 1550 nm, -40 to 85°C operating temperature |
| SFP-1G20BLC | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1550 nm, RX 1310 nm, 0 to 60°C operating temperature |
| SFP-1G20BLC-T | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1550 nm, RX 1310 nm, -40 to 85°C operating temperature |
| SFP-1G40ALC | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX 1310 nm, RX 1550 nm, 0 to 60°C operating temperature |
| SFP-1G40ALC-T | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX 1310 nm, RX 1550 nm, -40 to 85°C operating temperature |
| SFP-1G40BLC | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX 1550 nm, RX 1310 nm, 0 to 60°C operating temperature |
| SFP-1G40BLC-T | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX 1550 nm, RX 1310 nm, -40 to 85°C operating temperature |
| SFP-1GEZXLC | SFP module with 1 1000BaseEZX port with LC connector for 110 km transmission, 0 to 60°C operating temperature |
| SFP-1GEZXLC-120 | SFP module with 1 1000BaseEZX port with LC connector for 120 km transmission, 0 to 60°C operating temperature |
| SFP-1GLHLC | SFP module with 1 1000BaseLH port with LC connector for 30 km transmission, 0 to 60°C operating temperature |
| SFP-1GLHLC-T | SFP module with 1 1000BaseLH port with LC connector for 30 km transmission, -40 to 85°C operating temperature |
| SFP-1GLHXLC | SFP module with 1 1000BaseLHX port with LC connector for 40 km transmission, 0 to 60°C operating temperature |
| SFP-1GLHXLC-T | SFP module with 1 1000BaseLHX port with LC connector for 40 km transmission, -40 to 85°C operating temperature |
| SFP-1GLSXLC | SFP module with 1 1000BaseLSX port with LC connector for 500 m transmission, 0 to 60°C operating temperature |
| SFP-1GLSXLC-T | SFP module with 1 1000BaseLSX port with LC connector for 500 m transmission, -40 to 85°C operating temperature |
| SFP-1GLXLC | SFP module with 1 1000BaseLX port with LC connector for 10 km transmission, 0 to 60°C operating temperature |
| SFP-1GLXLC-T | SFP module with 1 1000BaseLX port with LC connector for 10 km transmission, -40 to 85°C operating temperature |
| SFP-1GSXLC | SFP module with 1 1000BaseSX port with LC connector for 300/550 m transmission, 0 to 60°C operating temperature |
| SFP-1GSXLC-T | SFP module with 1 1000BaseSX port with LC connector for 300/550 m transmission, -40 to 85°C operating temperature |
| SFP-1GZXLC | SFP module with 1 1000BaseZX port with LC connector for 80 km transmission, 0 to 60°C operating temperature |
| SFP-1GZXLC-T | SFP module with 1 1000BaseZX port with LC connector for 80 km transmission, -40 to 85°C operating temperature |
| SFP-1GTXRJ45-T | SFP module with 1 1000BaseT port with RJ45 connector for 100 m transmission, -40 to 75°C operating temperature |
• Power Supplies |
|
| DR-120-24 | 120W/2.5A DIN-rail 24 VDC power supply with universal 88 to 132 VAC or 176 to 264 VAC input by switch, or 248 to 370 VDC input, -10 to 60°C operating temperature |
| DR-4524 | 45W/2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC or 120 to 370 VDC input, -10 to 50° C operating temperature |
| DR-75-24 | 75W/3.2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC or 120 to 370 VDC input, -10 to 60°C operating temperature |
| MDR-40-24 | DIN-rail 24 VDC power supply with 40W/1.7A, 85 to 264 VAC, or 120 to 370 VDC input, -20 to 70°C operating temperature |
| MDR-60-24 | DIN-rail 24 VDC power supply with 60W/2.5A, 85 to 264 VAC, or 120 to 370 VDC input, -20 to 70°C operating temperature |
• Mounting kits |
|
| WK-30-02 | Wall-mounting kit, 2 plates, 4 screws, 30 x 66.8 x 2 mm |
| RK-4U | 19-inch rack-mounting kit |
Produkter i denna serie
| Info | Portar | ||||||||
| Ethernetportar | Fiberportar | ||||||||
| Namn | Temperatur- område |
Managerbar | Totalt portantal |
Gigabit Ethernet |
Ethernet Portar |
PoE Portar |
M SC | M ST | M SC |
|---|---|---|---|---|---|---|---|---|---|