M2M-IOT Cellular Gateway – Wireless LAN (WiFi)
Specifikation:
| Device Interface1 | |
| WAN |
1x embedded HSPA+ (dual SIM),
1x RJ45 FE (configurable),
1x USB 2.0 (3G/4G failover)
|
| LAN | 3~4 x RJ45 FE |
| Expansion | 1xDB9 (RS232/RS485), 2xSIM Slot, 1xDI, 1xDO, 1xRJ12 (Console) |
| 3G/4G Band2 |
LTE: 800/900/1800/2600 MHz,
UMTS: 900/2100 MHz
|
| Antenna |
2x 5dBi detachable ant. (WiFi),
2x 3dBi detachable ant. (3G/4G)
|
| Power Source | Dual DC 9V ~ 48V |
| WAN Functions | |
| WAN |
Multiple WANs, Failover / Load Balance,
Configurable Ethernet / 4G
|
| Ethernet | Dynamic IP, Static IP, PPPoE, PPTP, L2TP |
| 3G/4G | NDIS for 3G/4G |
| IPv6 | Dual Stack, 6-in-4, 6-to-4, Dynamic, Static, PPPoE |
| Basic Functions | |
| Ethernet | LAN IP, Subnet Mask |
| WiFi System | 802.11n 2Tx2R MIMO 300Mbps (2.4GHz) |
| WiFi Operation | AP Router, WDS, WDS Hybrid Modes |
| Mode & Func | Multi-SSID, WPS, WMM |
| WiFi Security | WEP, WPA,WPA2, WPA-PSK, WPA2-PSK, 802.1x |
| VLAN | Port-based, Tag-based |
| NAT | ALG, Special AP, DMZ Host, Virtual Server/Computer, PPTP/L2TP/IPSec Pass Through |
| Routing | Static, Dynamic: RIP1/RIP2, OSPF, BGP |
| Client&Server | DHCP, DDNS, IGMP |
| Management | |
| System | Web, Telnet CLI, SNMP, SMS, TR-069 |
| Advanced Functions | |
| Firewall | SPI Firewall with Stealth Mode, IPS |
| Access Control | Packet Filters, URL Blocking, MAC Address Control |
| QoS & BWM | Policy-based Bandwidth Control and Packet Flow Prioritization based on MAC/VLAN Tag/IP/DSCP/TCP/UDP/Well-known Service/Group |
| VPN Tunneling | IPSec, PPTP, L2TP, GRE VPN Tunneling with Full Tunnel, Tunnel Failover, Tunnel Load Balance, L2TP over IPSec, and Smart Conf. Capabilities |
| VPN Scenario | Site to Site, Site to Host, Host to Site, Host to Host, and Dynamic VPN |
| VPN Capability | IPSec: up to 8 tunnels |
| Redundancy | VRRP |
| Applications | |
| Mobile | SMS, USSD, Network Scan* |
| Serial | Virtual COM, Ethernet to COM Bridge, Modbus |
| DIDO | Digital input, Digital output |
| System | |
| System | Status & Statistics, Tools, Scheduling, FW Upgrade, Backup & Restore Settings. |
| Environment | |
| Operation Temp. | -20℃ ~ 60 ℃ |
| Storage Temp. | -40℃ ~ 85 ℃ |
| Humidity | 10% ~ 95% (non-condensing) |
1. Specifications are subject to change without advanced notice.
2. Supported frequency band is dependent upon regional hardware version.